-3125x750.png "Mystatic International Limited")
-150x150w.png){kind=logo}
F11E
Brand: Morco
Diaphragm for Brass Bodies Only on Morco F11E
This genuine Morco diaphragm is for use with brass-bodied water control assemblies on the F11E model. It regulates gas flow in response to water movement and is not suitable for use with plastic-bodied versions of the unit.
Features:
Genuin..
£12.45
Brand: Morco
Electrodes s/n ending up to 0937 for Morco F11E
Dimensions:
Width: 50mm
Height: 20mm
Length: 300mm
Compatible Models:
F11E
Features:
Genuine Morco Spare Part
Morco Part Number - MRS0090..
£25.95
Brand: Morco
Electronic Circuit (Rear) for Morco F11E
Dimensions:
Width: 117mm
Height: 39mm
Length: 133mm
Length of cable: 1.5m
Compatible Models:
F11E
Features:
Genuine Morco Spare Part
Morco Part Number - MRS0070..
£94.45
Brand: Morco
Flue Venturi for Morco FEB & F11 Models – MCB2100
The Morco Flue Venturi MCB2100 is a genuine replacement part used in the flue system of compatible Morco boiler models. It helps regulate airflow within the flue to support proper combustion and boiler performance.
Features:
Genuine Mor..
£9.95
Brand: Morco
Gas & Water Control Knob for Morco F11E
This genuine Morco gas and water control knob is a direct replacement for the Morco F11E water heater. It fits onto the front control panel and allows manual adjustment of gas or water flow.
Features:
Genuine Morco Spare Part
Morco Part Number:..
£11.45
Brand: Morco
Gas / Water Control Knob without Guide for Morco F11E Models – MRS0020
The Morco Gas / Water Control Knob MRS0020 is a genuine replacement part for Morco F11E water heaters. This knob fits onto the control spindle and is used to adjust either the gas or water setting, depending on installation...
£10.95
Brand: Morco
Heat Exchanger s/n end 0938 onwards for Morco F11E & F11EL
Dimensions:
Width: *mm
Height: *mm
Length: *mm
Compatible Models:
F11E
F11EL
Features:
Genuine Morco Spare Part
Morco Part Number - MRS0065..
£200.45
Brand: Morco
Heat Exchanger Spring Clip for Morco D61 & F11E Models – FW0512
The Morco Heat Exchanger Spring Clip FW0512 is a genuine replacement part for Morco D61B, D61E, F11E, and F11EL water heaters. It is used to secure the heat exchanger in place within the unit.
Features:
Genuine Morco spare..
£9.45
Brand: Morco
Horizontal Flue Kit for Morco Flues
Dimensions:
Width: *mm
Height: *mm
Length: *mm
Compatible Models:
FEB20E
F11E
F11EL
FEB24E
FEB24ED
FEB24ED3*
Features:
Genuine Morco Spare Part
Morco Part Number - RSF003..
£80.45
Brand: Morco
LPG Gas Valve for Morco F11E
Dimensions:
Width: 102mm
Height: 130mm
Length: 210mm
Compatible Models:
F11E
Features:
Genuine Morco Spare Part
Morco Part Number - MRS0180..
£186.95
Brand: Morco
Main Burner Injector (6 Pack) for Morco D51 & D61
This genuine Morco injector set includes six main burner injectors used in a range of water heater models. Each injector controls gas flow into the burner, supporting correct combustion within the appliance.
Features:
Genuine Morco Spar..
£19.45
Brand: Morco
Microswitch for Morco F11E
This genuine Morco microswitch is a replacement part for selected F11 series water heaters. It plays a key role in the ignition sequence by signalling water flow, allowing the burner to ignite when a hot water tap is opened.
Features:
Genuine Morco Spare Part..
£12.45